TNOU Term End UG/PG/Diploma Practical Exam Time Table 2014

Tamil Nadu Open University: Term End UG/PG/Diploma Practical Examination-Time Table 2014:

Are you student of Tamil Nadu Open University, looking for its latest time table for UG/PG/Diploma courses ? Hereunder you can collect the time table information. TNOU, recently released the official notification regarding the time table. Look below to note your exam schedule.

                                               Prof. Dr. S Vijayan.

                                            Controller of Examination I/C

You can also download the PDF file here.

Internal Marks assessment schedule, Anna University, Chennai

Anna University affiliated colleges: Internal Marks assessment schedule:

The following is the schedule for assessment of internal marks of all B.E.B.Tech/M.E/M.Tech and other UG/PG courses offered in the Anna University and its affiliated colleges.

Controller of Examinations

Ref: www.annauniv.edu

Analysis and design of info system, LPU, B.C.A Computer Applications 2010 Question Paper

This is question paper asked in the year 2010 for B.C.A Computer Applications from Lovely Professional University. This is the paper "Analysis and design of info system" for code : CAP302.

Lovely Professional University
CAP302 : Analysis and design of info system
Time Allowed: 1.5 hours
Maximum Marks :50

1. This Paper contains six questions divided in 3 parts on two pages.
2. Part A and B are compulsory.
3. In Part C (Questions four to 6), attempt any two questions out of 3. Attempt all parts
of the question chosen.
4. The marks assigned to every question are shown at the end of every question in
square brackets.
5. Ans all the questions in serial order.

Part - A
Q1.
a. Discuss the term System Analyst with examples. [2]
b. Write down the various categories of info systems. [2]
c. what are the term Decision Tables with examples. [2]
d. what are the various activities involved in Reqruitment Determination. [2]
e. describe the term Cost Benefit Analysis with examples. [2]

Q2.
a. As a project manager, write down the procedures you will follow to consider the
feasibility of the "Examination System Project" of a particular university. [5]
b. As a team leader how will you determine the requirements of a particular project
allocated to your team? Take examples of any project and discuss. [5]


Part - B
Q3. Give a detailed explanation of the tools available in ADI for documenting
procedures and decisions. [10]

Part - C
Q4. Suppose you want to develop an "Employee info system" for a multinational
company. Identify the SDLC steps needed for its implementation. [10]

Q5. As a manager of a board of directors of a multi-national company, how will you
choose the project for your company and how will you create the review document for
identical. [10]

Q6. During the initial stage of a project development in your company, as a project
manager you realized that the fact it will not be feasible for your company to deliver the
project well in time and at the needed cost by client. Now discuss the procedures to
handle this infeasible project. [10]

Business Environment, LPU, B.A Degree 2011 Question Paper

Lovely Professional University (LPU), Previous years, model, sample and latest Question Papers:

Want old question papers of Lovely Professional University ? Get all question papers here. Here is one of the question paper "Business Environment" for B.A Degree Examination. This question paper was originally asked in the year 2011. 

Lovely Professional university

B.A Degree Examination 2011
Course code : MGT 511: BUSINESS ENVIRONMENT
Time allowed :1.5 hours
1.This paper contains five questions divided in 3 parts 
2.Parts A and B are compulsory 
3.In part C( Questions four to 5), attempt any one question out of 2. Attempt all parts of the questions chosen
4.The marks assigned to every questions are shown at the end of every question in the bracket 5.answer all questions in serial order.

Part A

1. a) Define a "bull market"and a "Bear market? (2 marks)
b) What do you understand by Capital account and current account?
c) Explain the PEST analysis? (2 marks)
d) What is the meaning of industrialization ? (2 marks)
e) What is meant by legal environment of a business? (2 marks)

2. a) Suppose the RBI increases the REPO and reverse REPO rate by 25 basis points.What is the implication of this to the economy ? (5 marks)
b) What is the difference ranging from CENVAT and VAT? (5 marks)

3. What is economic development ? Discuss in detail the common characteristics of underdeveloped /developing countries? (15 marks)

4. Suppose you are an automobile manufacturer who wants to enter Indian market Conduct a PESTLE analysis of India and explain the factors that will affect you.(15 marks)

5. "A counter cyclical fiscal policy can be used as a stabilization tool in a developing economy" explain.(15 marks)

Part B and Part C will be uploaded shortly.

Management Information System, PU, B.B.A 2012 Question Paper

Sponsored Links

PU, Periyar University old, model, previous and latest years question papers - Management Information System, B.B.A 2012 Question Paper:

On a search for Periyar University previous years, sample, model question papers? Management Information System question papers of the year 2012 for the course B.B.A Degree Examination is provided hereunder. Use the question paper for your future exams.

Periyar University
B.B.A. II year Examination, 2012
Management Information System
Part - A (10 * 2 = 20)
Answer ALL Questions

1) Define information
2) Define internal environment
3) Define application software with example
4) Specify any four input units
5) Define a sub-system
6) What is an open system ?
7) Define DBMS
8) What is meant by on-line processing ?
9) Explain strategic decision
10) Define information system

Part - B (5 * 4 = 20)
Answer ALL Questions

11) a) Explain the various sources of information in an organisation (or)
b) Explain the importance of decisions

12) a) Discuss the advantages of computer in accounting (or)
b) Explain the components of CPU

13) a) Write short notes on boundary of a system (or)
b) Write down the various classification of a system

14) a) Write short notes on expert systems (or)
b) Explain the information systems used for managers

15) a) Discuss the input for a marketing information system (or)
b) Discuss the impact of IS in decision making

Part - C (5 * 12 = 60)
Answer ALL Questions

16) a) Discuss the external factors that influence the organisation (or)
b) Explain the advantages of MIS in decision making

17) a) Discuss the characteristics of computer information system (or)
b) Explain the various types of memory units in a computer

18) a) Discuss the elements of a system in detail (or)
b) Discuss the evaluation and maintenance of MIS

19) a) Explain the operations of a transaction processing system (or)
b) Explain the operations in the database

20) a) Explain the various types of reports generated by financial information system (or)
b) Discuss on manufacturing information system

Production Management, PU B.B.A. II year examination, 2012 Question Paper

Sponsored Links

PU, Periyar University old, model, previous and latest years question papers >>Production Management, B.B.A. II year examination, 2012 Question Paper

Looking for Periyar University previous years, sample, model question papers? Production Management question papers of the year 2012 for the course B.B.A Degree Examination is provided hereunder. Use the question paper for your future exams.

Periyar University
Production Management
Part-A (2 * 10 = 20 Marks)
Answer ALL Questions:

1) Define production management
2) What is plant layout?
3) What is production planning?
4) What is production control?
5) What do you understand by quality control?
6) What is Inspection?
7) What is plant?
8) State any two advantages of plant maintenance.
9) What is time study?
10)What is motion study?

Part - B (5 * 4 = 20)
Answer ALL Questions
11) a)What are the problem
s of production management? (or)
b)Explain the scope of production management

12) a)What are the functions of production planning? (or)
b)State the main objectives of production order

13) a)What are the objectives of quality control? (or)
b)What are the major objects of Inspection?

14) a)What are the various types of Maintenance? (or)
b)What is preventive maintenance?What are its objectives?

15) a)State the importance of work study (or)
b)State the objectives of work measurement

Part - C (5 * 12 = 60)
Answer ALL Questions

16) a)What factors affects the choice of a suitable place for the location of a plant? (or)
b)Describe the various types of layout

17) a)Describe the functions of routing and scheduling (or)
b)What are the objectives of production planning?

18) a)What are the advantages of centralised inspection? (or)
b)State the importance of quality control

19) a)What are the problems of maintenance management? (or)
b)What are the disadvantages of breakdown maintenance?

20) a)Explain the need for work study in an enterprise (or)
b)What are the steps involved in motion study?

Foundation Course, KSOU M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Foundation Course, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

Looking for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) First Semester Examination 2010. This question paper is useful for those students who are preparing for Foundation Course for M.Sc. (I.T.) Examination. All questions carry one mark. Use the question paper for your upcoming exams to score high marks.
-----------------------------------------------------------------------------------------------------------------

KSOU, Karnataka State Open University
I Semester M.Sc. (I.T.) Examination, June/July 2010
Foundation Course
Time : 3 Hours Maximum Marks : 100
Instruction : Answer all the questions. Each question carries one mark.
PART – A
-----------------------------------------------------------------------------------------------------------------
1. In addition of two signed numbers, represented in 2’s complement form generates an overflow if
a) A . B = 0 b) A θ B = 0
c) A θ B = 1 d) A + B = 1
Where A is the carry in to the sign bit position and B is the carry out of the sign bit position.
2. Round Robin scheduling is used in
a) Disk scheduling b) CPU scheduling
c) I/O scheduling d) Multitasking
3. Banker’s algorithm is used in
a) Threads b) CPU scheduling
c) Deadlock avoidance d) Paging
4. Compaction is a solution to
a) Dead locks b) Fragmentation
c) Security problems d) Concurrency problems
5. For (;;)
a) means the test which is done using some expression is always true
b) is not valid
c) will loop forever
d) should be written as for ( )
6. Within a switch statement :
a) Continue can be used but Break cannot be used
b) Continue cannot be used but Break can be used
c) Both continue and Break can be used
d) Neither continue nor Break can be used.
7. Literals are
a) essentially constants directly used in an operand field
b) essentially variable directly used in an operand field
c) essentially constants directly used in an operator field
d) essentially constants directly used in a program
8. Those activities of an assembler which are concerned with the processing of a macro are termed as
a) Assembly time activities b) Expansion time activities
c) Complier time activities d) Linker time activities
9. Loader is also known as
a) Linkage editor b) Loader editor
c) Compiler d) Assembler
10. Error detection at data link level is achieved by
a) Bit stuffing b) CRC
c) Hamming code d) Cross product
11. The operation which is not considered a basic operation of relational algebra is
a) Join b) Selection
c) Union d) Cross product
12. Fifth normal form is concerned with
a) Functional dependency b) Multivalued dependency
c) Join dependency d) Domain-Key
13. An analysis which determines the meaning of a statement once its grammatical structure becomes known is termed as
a) Semantic analysis b) Syntax analysis
c) Source text analysis d) Lexical analysis
14. The C language terminator is
a) Semicolon b) Colon
c) Period d) Exclamation mark
15. What is true about the following C functions ?
a) Need not return any value
b) Should always return an integer
c) Should always return a float
d) Should always return more than one value.
16. Main must be written as
a) The first function in the program
b) Second function in the program
c) Last function in the program
d) Any where in the program.
17. Which of the following about automatic variables within a function is correct ?
a) Its type must be declared before using the variable
b) They are local
c) They are not initialized to zero
d) They are global
18. Write one statement equation of the following two statements
x = sqrt(a);
return (x);
Choose from one of the alternatives
a) return(sqr(a)); b) printf(“sqr(a)”);
c) return(a*a*a*); d) printf(“%d”,sqr(a));
19. Which of the following about the C comments is incorrect ?
a) comments can go over multiple lines
b) comment can start any where in the line
c) a line can contain comments with out any language statements
d) comments can occur within comments.
20. What is the value of y in the following code ?
x = 7 ; y = 0;
if (x = 7)
y = y + 1
else
y = 6;
a) 7 b) 0
c) 1 d) 6
-----------------------------------------------------------------------------------------------------------------
PART – B
Fill in the blanks with suitable answers. Each question carries one mark.
-----------------------------------------------------------------------------------------------------------------
1. If A = {2, 3, 4, 5}, B = {1, 2, 5, 6 } then A B is –––––––––––––
2. ––––––– denotes the set of rational numbers.
3. If A is a matrix such that A = AT then A is called ––––––––––– matrix.
4. The solution of the equation Y = x3 – 3x2 + 3x – 1 is ––––––––––

5. If
                            1   0   1
             A    =      2   1   0
                            3   0   1

Then A3 is –––––––––––
6. Area of a circle is given by –––––––––
7. A null set contains ––––––––––– elements.
8. If A and B are two sets and f : A B is a function such that f(A) = B, then f is –––
9. If A is a set consisting of N elements then power set of A contains –––––––––– elements.
10. The slope intercept form of a line is ––––
11. Given y = ax, a is a constant, dy/dx = –––––
12. Π is called –––––– number.
13. ∫TAN xdx = –––––
14. Matrix multiplication does not satisfy –––– property.
15. IF A and B are matrices then (A + B)2 is ––––
16. Objects in a set are called –––––––
17. ––––––– denotes a set of natural numbers.
18. D = F (P, A) is a ––––– function.
19. Area of a triangle is a given by –––––
20. When the area of a square is doubled then side increases by –––––
21. 1’s complement of 10001 is –––––
22. In an Half adder, given 2 bits X and Y, sum S = ––––––
23. A byte contains –––––––– bits.
24. (1100110)2 = ( )10
25. (45)10 = ( )2
26. (CAFE)16 = ( )10
27. (11.625)10 = ( )2
28. (11011)2 – (10101)2 = ( )2
29. 2’s complement of 1010 is ––––
30. (10011)2 = ( ) gray.
31. LSB carries –––––– weight.
32. =
x = x is ––––––––––––––– law.
33. (563)8 = ( )10
34. A full subtractor is a ––––– circuit.
35. The output of Nand gate is complement of –––––– gate.
36. The logic circuits whose output at any instant of time are dependent on not only
present inputs but also on past inputs are called –––––– circuits.
37. Group of flip flops used to store particular group of 0’s and 1’s are called –––––
38. Mapping many inputs to one output is done by a –––––
39. A flip flop has pair of ––––– outputs.
40. Backup storage is provided by ––––– memory.
41. A logic circuit that accepts one input distributes it over several outputs is a ––––
42. ––––– is a logic circuit used to add three bits.
43. Excess - 3 code of 354 is ––––––––
44. A translator which translates High Level Language program to Machine Level Language program is –––––
45. stdio.h has predefined ––––– functions.
46. Low level language consists of ––––– numbers.
47. Data type format for floating point number is –––––

48. The looping statements in C are –––––––––
49. –––––– is an example for application software.
50. A function called by itself is called –––– function.
51. Pictorial representation of a program is called –––––––
52. ––––––– is an example of high level language.
53. Data is organized in to logical groups called ––––– to enable data management.
54. ––––––– is an application of stacks.
55. Mouse is a ––––––– device.
56. Step by step depiction of the solution of a problem is called ––––––
57. The full form of RAM is –––––––
58. Scanner is essentially a __________ device.
59. The term computer is derived from ___________
60, ______________ is an example for secondary memory.
61. Any one operation on stack is ____________
62. FIFO stands for _____________
63. ___________ tree has exactly two or zero children.
64. Symbol table contains ___________
65. EPROM stands for ___________ .
66. Output of EXOR gate is one, if both the inputs are __________
67. ______________ gate is called inverter.
68. In a SR flip-flop, S = 1 and R = 0, the flip-flop goes to __________ state.
69. In an Half subtractor, given two bits A and B, borrow B = __________
70. In combinational logic circuits, output depends on _____ inputs.
71. A flip-flop where the slave copies master is called __________
72. Detecting and correcting errors in a program is called ___________
73. Syntax errors are detected during ____________ process.
74. ____ statement is avoided in structured programming.
75. A truth table for n inputs has ___________ combinations.
76. DDL stands for ___________
77. C is called _____________ language.
78. Bitwise AND operator in C is _______________
79. The ? : operator in C is called __________
80. The node at the top of the tree is called _________

-----------------------------------------------------------------------------------------------------------------

Advanced Operating System, M.Sc. KSOU 1st Semester (I.T.) Examination, June/July 2010 Question Paper

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Advanced Operating System, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

On a look for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) First Semester Examination 2010. This question paper is useful for those students who are preparing for Advanced Operating System for M.Sc. (I.T.) Examination. Part A consists of 10 Questions carrying a total marks 25 and Part B has 8 questions out of which, you should answer 5 questions carrying 10 marks each. Use the question paper for your upcoming exams to score high marks.

KSOU, Karnataka State Open University
I Semester M.Sc. (I.T.) Examination, June/July 2010
Advanced Operating System
Time : 3 Hours 
Maximum Marks : 75
PART – A
Answer all questions : (12×2+1×1=25)
------------------------------------------------------------------------------------------------------------------
1. Mention the function of OS.
2. Define a process.
3. What is multithreading ?
4. What is a Deadlock ?
5. State Banker’s Algorithm.
6. What is fragmentation ? Mention different types.
7. Define Segmentation.
8. Mention attributes of a file.
9. What is authentication ?
10. What is RPC ?
11. Mention the characteristics of Distributed processing.
12. What are separate supervisors ?
13. What are Cross line - connected systems ?
------------------------------------------------------------------------------------------------------------------  PART – B
Answer any five from the following : (5×10=50)
------------------------------------------------------------------------------------------------------------------
1. Explain the following : 10
a) Storage hierarchy
b) Spooling
c) Time-sharing operating system.
2. Write a note on : 10
a) Process Control Block
b) Scheduling Queues
c) Multitasking
3. a) Explain different scheduling criteria. 6
b) Differentiate preemptive and non-preemptive scheduling. 4
4. a) With a diagram explain resource allocation graph. 5
b) Explain Safe State algorithm. 5
5. Explain Paging with a neat diagram. 10
6. a) What is thrashing and what is its cause ? 5
b) What is the role of page size in a paging environment ? 5
7. a) What is the need for migration ? Explain different types of Migration. 5
b) Discuss the importance of cache in distributed processing. 5
8. a) Explain Bus-Oriented Systems. 5
b) What are semaphores ? Explain how semaphores are used to implement mutual
exclusion and critical section problem. 5
------------------------------------------------------------------------------------------------------------------

KSOU, Visual Programming, M.Sc.1st Semester (I.T.) Examination, June/July 2010 Question Paper:

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Visual Programming, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

Are you looking for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) First Semester Examination 2010. This question paper is useful for those students who are preparing for Visual Programming for M.Sc. (I.T.) Examination. Part A consists of 10 Questions carrying a total marks 25 and Part B has 8 questions out of which, you should answer 5 questions carrying 10 marks each. Use the question paper for your upcoming exams to score high marks.
------------------------------------------------------------------------------------------------------------------

KSOU, Karnataka State Open University
I Semester M.Sc. (I.T.) Examination, June/July 2010
Visual Programming
Time : 3 Hours 
Maximum Marks : 75
PART – A
Answer all questions : (10×2+5×1=25)
------------------------------------------------------------------------------------------------------------------
1. What is VB wizard ?
2. What is the difference between a Form window and an application window ?
3. List the steps to create an application in VB.
4. Where do you add code to your programs ?
5. What extension does VB use for Active X controls ?
6. Write the function of Round ( ) and Int ( ) operations.
7. Write the function of Public ( ).
8. What is nesting ? Give example.
9. Why do you use serialize ( ) function ?
10. Write the purpose of checkboxes used in VB.
11. Briefly explain the following :
a) MDI
b) Textout ( )
c) Create font ( )
d) Visual data manager
e) On key down ( ).
------------------------------------------------------------------------------------------------------------------ PART – B
Answer any five questions : (5×10=50)
------------------------------------------------------------------------------------------------------------------
1. Create an application to calculate simple interest. Add 3 text boxes to accept input for principal, time, rate of interest and display simple interest in a textbox.Add two command buttons result and exit.
2. Explain the following :
i) Lcase ( ) ii) UBound ( ) iii) R Trim ( ) iv) RND ( ) v) Redim ( )
3. Explain different list boxes with example.
4. Explain the steps to create a project to display “welcome to VC++” in VC++.
5. Write and explain the steps to create Database in VB.
6. Write the steps to write code to the WM–MouseMove event in VC++.
7. Write a note on WM–Paint event.
8. Explain the steps to create a simple MDI program.
------------------------------------------------------------------------------------------------------------------

Analysis and Design of algorithms, KSOU M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Analysis and Design of algorithms, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

On a search for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) First Semester Examination 2010. This question paper is useful for those students who are preparing for Analysis and Design of algorithms for M.Sc. (I.T.) Examination. Part A consists of 10 Questions carrying a total marks 25 and Part B has 8 questions out of which, you should answer 5 questions carrying 10 marks each. Use the question paper for your upcoming exams to score high marks.
------------------------------------------------------------------------------------------------------------------

KSOU, Karnataka State Open University
I Semester M.Sc. (I.T.) Examination, June/July 2010
Analysis and Design of algorithms
Time : 3 Hours Maximum Marks : 75
PART – A
Answer all questions : (12×2+1×1=25)
------------------------------------------------------------------------------------------------------------------
1. Mention different characteristics of algorithm.
2. Explain 4 main block of an iterative process.
3. Mention 2 conditions that must be satisfied by any recursive procedure.
4. Mention the demerits of iteration method.
5. Define a finite graph, with an example
6. Define general graph.
7. Mention the properties of true.
8. Define a spanning tree.
9. Mention the steps involved in divide and conquer method.
10. What is cassette filling ?
11. What is backtracking ?
12. What is sequential search ?
13. A graph with finite number of vertices __________
------------------------------------------------------------------------------------------------------------------
PART – B
Answer any five questions : (5×10=50)
------------------------------------------------------------------------------------------------------------------
1. a) Write an algorithm to check whether a given point p(x,y) lies on x-axis or y-axis or in I/II/III/IV quadrant.
b) Write an algorithm to check whether the given number is palindrome or not.
2. a) Write an algorithm for merge sort.
b) Write an algorithm to implement hashing technique.
3. Use your own graph and find the following.
a) Spanning tree
b) Incidence matrix
c) Hamiltonian path
d) Binary tree.
4. Write a program to find the maximum and minimum of the list of n element with and without using recursion.
5. What is 0/1 knapsack ? Write algorithm and illustrate the difference between general knapsack and 0/1 knapsack.
6. Write the algorithm for job scheduling method and explain.
7. With an example explain :
a) Cassette filling problem
b) Subset problem.
8. Explain the different techniques for searching graph.
-----------------------------------------------------------------------------------------------------------------

KSOU, Industrial Management, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Industrial Management, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

Looking for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) First Semester Examination 2010. This question paper is useful for those students who are preparing for Industrial Management for M.Sc. (I.T.) Examination. Part A consists of 10 Questions carrying a total marks 25 and Part B has 8 questions out of which, you should answer 5 questions carrying 10 marks each. Use the question paper for your upcoming exams to score high marks.

KSOU, Karnataka State Open University
I Semester M.Sc. (I.T.) Examination, June/July 2010
Industrial Management
Time : 3 Hours 
Maximum. Marks : 75

PART – A
Answer all questions : (12×2+1×1=25)

1. What is job order production ?
2. Write the advantages of the functional layout.
3. What are the advantages of layout planning ?
4. Write the objectives of production control.
5. Write the routing procedure.
6. Write the functions of dispatching.
7. Write the difference between direct and indirect costing.
8. What is routine maintenance ?
9. What is price analysis ?
10. What do you mean by depreciation ?
11. What do you mean by motion study ?
12. Write the importance of quality control.
13. Define production phase.
 
PART – B
Answer any five questions : (5×10=50)

1. Explain in detail production planning and control.
2. Explain the importance of cost planning with respect to industrial management.
3. Explain different types of maintenance.
4. What do you mean by material management ? Explain in detail.
5. Write short note on following :
a) Budgeting
b) Creative purchasing.
6. What is time study ? Explain different methods of time study.
7. The growth of fall of an enterprise depends on its quality. Justify.
8. Explain the importance of computerization in an industry.

KSOU, Computer Programming , M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Computer Programming , M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

Are you in need  of old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) First Semester Examination 2010. This question paper is useful for those students who are preparing for Computer Programming  for M.Sc. (I.T.) Examination. Part A consists of 10 Questions carrying a total marks 25 and Part B has 8 questions out of which, you should answer 5 questions carrying 10 marks each. Use the question paper for your upcoming exams to score high marks.

KSOU, Karnataka State Open University

I Semester M.Sc. (I.T.) Examination, June/July 2010
Computer Programming
(Freshers)
Time : 3 Hours 
Maximum Marks : 75
Instruction : Answer all questions from Part A and answer any five questions from Part B.

PART – A                     (10×2+5×1=25)

1. What is an Algorithm ?
2. What is Flow Chart ?
3. What do you mean by linked list ?
4. What is the significance of pointers in Linked list ?
5. Explain the concept of Nested Structure.
6. What is complexity ?
7. What do you mean by enumerated constants ?
8. Explain the use of malloc(), calloc(), free() functions.
9. What is linear data structure ?
10. What is a stack ?
11. Define the following :
a) Queue
b) Graph
c) Tree
d) Recursion
e) Loop.

PART – B
Answer any five : (5×10=50)

1. Explain various types of Symbol uses in Flow Chart.
2. Explain the various types of Data types used in C language. Write a program to Read a name and display the same.
3. Write a program in C for finding the product of matrices.
4. Write a program to sort number in ascending order using Bubble sort.
5. What do you understand by Primitive and Simple Structures ? Give examples also.
6. Explain traversing using Depth First Search and Breadth First Search.
7. What do you mean by B-Tree ? Explain B-Tree Deletion.
8. What do you understand by Indexed Sequential file organization ?

KSOU, Advanced RDBMS, M.Sc. 1st Sem (I.T.) Examination, June/July 2010 Question Paper

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Advanced RDBMS, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

Searching for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) First Semester Examination 2010. This question paper is useful for those students who are preparing for Advanced RDBMS for M.Sc. (I.T.) Examination. Part A consists of 10 Questions carrying a total marks 25 and Part B has 8 questions out of which, you should answer 5 questions carrying 10 marks each. Use the question paper for your upcoming exams to score high marks.

KSOU, Karnataka State Open University

I Semester M.Sc. (I.T.) Examination, June/July 2010
Advanced RDBMS
(Freshers)
Time : 3 Hours 
Maximum Marks : 75
Instruction : Answer all questions from Part – A, and answer any five questions from Part – B.

PART – A             (10×2+5×1=25)

1. What is an Entity ?
2. Define Relationship.
3. Explain ER Diagram.
4. What is an attribute ?
5. What are weak and strong entities ?
6. Explain Heterogeneous Database.
7. Explain Generalization and Specialization.
8. Explain Distributed Concurrency Control.
9. Explain relational algebra operations.
10. Explain building block of DNA.
11. Expand the following :
a) ISDN
b) TDMA
c) GDS
d) CDMA
e) GSM.

PART – B
Answer any five : (5×10=50)

1. How are entities classified ? Explain the various types of entities with the help of examples.
2. What are the constraints on Specialization and Generalization ?
3. Explain Relational and Object Oriented Databases.
4. Explain the basic concepts of OODB.
5. Explain in brief different wireless access technologies used to connect mobile users to wired networks.
6. What is a multimedia data model ? Explain its architecture.
7. Explain the architecture of Data Mining Systems.
8. Explain the logical and physical design of data warehouse design.

KSOU, Discrete Mathematics, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Discrete Mathematics, M.Sc. First Semester (I.T.) Examination, June/July 2010 Question Paper:

Looking for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) First Semester Examination 2010. This question paper is useful for those students who are preparing for Discrete Mathematics for M.Sc. (I.T.) Examination. Part A consists of 10 Questions carrying a total marks 25 and Part B has 8 questions out of which, you should answer 5 questions carrying 10 marks each. Use the question paper for your upcoming exams to score high marks.

KSOU, Karnataka State Open University
I Semester M.Sc. (I.T.) Examination, June/July 2010
Discrete Mathematics
(Freshers)
Time : 3 Hours 
Maximum Marks : 75
Instructions : 1) Answer all questions in Part – A.
                    2) Answer any 5 questions in Part – B.
PART – A
1. What is a set ? (10×2+5×1=25)
2. What is a graph ?
3. What is a venn diagram ?
4. What is a Finite Geometry ?
5. Explain Eulerian walk.
6. Describe Hamiltonian cycles.
7. What is sorting ?
8. What is searching ?
9. Explain Inclusion-Exclusion.
10. Explain Pigeonholes.
11. Define the following :
a) Quantifiers
b) Classical Cryptography
c) Paths
d) Eulers formula
e) Fibonacci Theorem.

PART – B
Answer any 5 questions : (5×10=50)
1. Prove that each row of Pascal’s triangle starts and ends with 1.
2. Explain equivalence and implication with examples.
3. Explain the Twin Paradox and the Good old logarithm with an example.
4. Explain Convex polygons with an example.
5. Explain intersections of Diagonals with an example.
6. Explain Binomial theorem.
7. Explain Coloring Graphs with two colors.
8. Explain Record Keeping.

KSOU, Algorithm Analysis and Design, M.Sc. (I.T.) 1st sem Examination, June/July 2010 Question Paper

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Algorithm Analysis and Design, M.Sc. (I.T.) Examination, June/July 2010 Question Paper:

Are you searching for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find here in this blog, even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post that contains the latest year 2010 for KSOU, Karnataka State Open University question paper conducted in the month June/July, for the M.Sc. (I.T.) Examination 2010. This question paper is useful for those students who are preparing for Algorithm Analysis and Design for M.Sc. (I.T.) Examination. Part A consists of 10 Questions carrying a total marks 25 and Part B has 8 questions out of which, you should answer 5 questions carrying 10 marks each. Use the question paper for your upcoming exams to score high marks.

KSOU, Karnataka State Open University
I Semester M.Sc. (I.T.) Examination, June/July 2010
Algorithm Analysis and Design
(Freshers)
Time : 3 Hours
Maximum Marks : 75

PART – A
I. Answer all questions : (10 × 2 + 5×1 = 25)

1) What is an Algorithm ?
2) What is Abstract Data type ?
3) What are finite automata ?
4) What is a pointer ?
5) What is a linked list ?
6) What is data dictionary ?
7) What is a set ?
8) What is Dynamic Programming ?
9) What is Sorting ?
10) What is Backtracking ?
11) Define the following :
a) External sorting
b) RBT
c) Heap
d) KMP
e) Mapping

PART – B
II. Answer any five questions : (5×10=50)

1. How will you define an algorithm ? Describe the criteria that an algorithm must satisfy.
2. Which data structure makes of a LIFO list ? Explain.
3. What is ADT ? Explain.
4. Describe the various notations used to define the efficiency of an algorithm.
5. Explain the KMP algorithm for string matching.
6. Discuss the Traveling Salesman Problem.
7. What is a heap ? Explain Heap sort.
8. What are the basic operations which can be performed on strings ?

KSOU, Data Structures Lab, B.Tech (Computer Science) Examination, August 2011 Question Paper:

KSOU, Karnataka State Open University old, model, previous and latest years question papers >> Data Structures Lab, B.Tech (Computer Science) Examination, August 2011 Question Paper:

Are you searching for old, previous years and latest question papers of KSOU, Karnataka State Open University ? You can find even sample and model question papers of KSOU, Karnataka State Open University and various universities in India. Have a look at this post which contains the latest year 2011 for KSOU, Karnataka State Open University question paper conducted in the month August, for the B.Tech Degree Examination 2011. This question paper is useful for those students who are preparing for Data Structures Lab for B.Tech (Computer Science) Examination . Part A consists of 5 Questions of marks 5 for each and Part B has 1 question of either or choice with a weight-age of 50 marks. Use the question paper for your upcoming exams to score high marks.

KSOU, Karnataka State Open University
B.Tech (Computer Science) Examination, August 2011
Data Structures Lab
Time: 3 hours
Maximum Marks: 75

Instructions: 1) Answer ALL questions in Part - A and either (a) or (b) in Part - B
                   2) Each Questions carry 5 marks in Part - A and 50 marks in Part - B

Part - A

1. What is meant by Linked list? Explain
2. Explain array with suitable examples
3. Write a simple program to find Fibonacci series
4. Explain Help sort algorithm.
5. What is meant by Queue? Explain

Part - B

1. a) Write a simple program to multiple two matrix using array concept, 

Or  b) Write a simple program using Binary searching tree

DAVV Financial systems and services M.B.A 2011 Question Paper

Devi Ahilya Vishwavidyalaya (DAVV) University, Indore old, model, previous and latest years question papers >> Financial systems and services M.B.A Degree Examination 2011 Question Paper: 

Are you searching for old, previous years and latest question papers of Devi Ahilya Vishwavidyalaya (DAVV) University, Indore ? You can find even sample and model question papers of Anna University and various universities in India. Have a look at this post which contains the latest year 2011 Devi Ahilya Vishwavidyalaya (DAVV) University, Indore question paper conducted in the month April/May 2011, for the M.B.A Degree Examination 2011. This question paper is useful for those students who are preparing for Financial systems and services. Part A consists of 10 Questions out of which you have to answer for any six questions.

Devi Ahilya Vishwavidyalaya (DAVV) University, Indore
M.B.A Degree Examination, 2011
Financial systems and services
Attempt any six questions, (Total marks 80)
Short notes is compulsory.

1.Briefly describe the major types of risks to which banks are exposed.

2.What do you understand by the term Basel with respect to Indian Economy ?

3.What do you mean by Mutual Funds? Explain different types of Mutual Funds Schemes present in Indian Financial System.

4."Investing in securities through mutual funds is a better choice than other direct investment." Explain the statement.

5.What are the different insurance services provided by the insurance companies in India?

6.What is venture capital? How does it help to new projects? Explain its types and their advantages.

7.What is an Investment Strategy ? What are its advantages.

8.Define factoring. What are the different types of factoring?

9.What do you understand by the term IFRS? Explain its concepts.

10.Short Notes on :
a) Hedge Funds
b) E-Banking
c) Securitization
d) Credit Rating Agencies

AE 1203-Elements of Aeronautics collection of 2 marks questions, B.E Aeronautical Engineering

Anna University old, model, previous and latest years question papers >> AE 1203 – Elements of Aeronautics, Third Semester B.E Aeronautical Engineering Two marks Questions from all all years (2010, 2009, 2008, 2007, 2006, 2005.....) of university question papers:

Looking for 2 marks questions of all previous years for the subject AE 1203-Elements of Aeronautics from Anna University for B.E Aeronautical Engineering ? Such huge collection of question papers are hereunder. Have a look at this post and get your question papers.

Anna University, Chennai
Department of Aeronautical Engineering
AE 1203-Elements of Aeronautics

PART A
April/May 2010

1. Define Ornitopter. Who invented it?
2. What are secondary control surfaces?
3. Define biplane interference.
4. Define Aerodynamic centre.
5. Explain the term 'Empennage'.
6. What is tropopause?
7. What is the use of stiffness?
8. What are TAS and IAS?
9. Why is titanium suitable as airframe material for supersonic aircraft?
10. The rocket can move in vacuum. Is it actual or false? Justify.

NOV/DEC 2008

11. What are high lift devices? What has prompted their development?
12. What is the basic difference ranging from a hot air balloon and an aircraft?
13. What is equivalent air speed? How is it related to actual air speed?
14. What are the functions of ailerons in an aircraft?
15. Define Troposphere and temperature lapse rate.
16. Define aerodynamic centre.
17. Enumerate the stiffener shapes used in aircraft fuselage shell.
18. What are the main advantages and disadvantages of composite materials for aircraft structures?
19. State the propellant burning configurations possible in solid propellant motors.
20. What are hyperbolic propellants? provide an example.

APRIL/MAY 2008

21. Distinguish ranging from biplane and mono plane aircraft (Repeated question)
22. Why is it that turbo fan engine is very widely used in commercial aircraft
23. What is the role of rudder
24. What is tropopause
25. What is a cambered air-foil
26. What are the components of a modern air-plane (name any four) for which aluminium alloy is used
27. What are the main structural components of an aircraft wing
28. What are the limitations of a piston engines for aircraft propulsion
29. Define specific impulse of a rocket
30. Why is it that titanium is suitable as airframe material for supersonic aircraft

NOV/DEC 2007

31. Distinguish ranging from air breathing propulsion and rocket propulsion.
32. What are the new kinds of alloys used now-a-days for airframe construction of modern aircraft?
33. Name any 4 components of airframe of an air-plane and mention their functions.
34. What is stratopause?
35. Define Mach number.
36. What are the general kinds of construction of an air-plane structure?
37. What are the general considerations for the fuselage design of an air-plane. Name any two.
38. What is the basic operating principle of a piston engine?
39. Define specific impulse of a rocket.
40. What is jet thrust?

MAY/JUNE 2007

41. Distinguish ranging from a glider and a sail plane
42. What are control tabs and for what purpose they are used
43. What is the purpose of turn and slip indicator
44. Define international standard atmosphere (ISA) and discuss its significance
45. What are the effects of large camber on the flow over the upper surface of the wing
46. What are the most common manoeuvres usually classed under the heading of aero
47. What are the general kind of construction of a fuselage structure
48. What are the factors that influence the selection of the structural materials for an aircraft
49. What are the requirements of a good power plant
50. Why does the blade angle of a propeller reduce from boss to tip

NOV / DEC 2006

51. Differentiate ranging from biplane and monoplane.
52. State the 2 types of aircraft.
53. Differentiate ranging from conventional control and powered control.
54. What are the basic instruments for flying?
55. Define 'absolute altitude'.
56. Explain 'Mach Number'.
57. Differentiate ranging from Monocoque construction and semi-monocoque construction.
58. Enumerate the composite materials.
59. What is 'Ramjet' engine?
60. What are the advantages and the disadvantages of rocket propulsion?

MAY / JUNE 2006

61. Write down the principle difference ranging from lighter than air and heavier than air-planes
62. What are biplane and monoplane/ Write down the advantages and disadvantages of biplane over monoplanes
63. Sketch the push-pull rod control actuation for aileron operation
64. List out the difference classification of flight vehicles
65. What are TAS and IAS
66. Define AR, Camber of an air-foil
67. Differentiate ranging from Pratt and Warren trusses of the fuselage constructions
68. What are the functions of Ribs and Spars
69. Write down the difference ranging from reciprocating and Gas turbine engines
70. Classify various kinds of rocket engine

NOV / DEC 2005

71. Differentiate ranging from anhedral and dihedral.
72. What do you mean by "Absolute ceiling"?
73. What is the purpose of elevator?
74. Enumerate the engine instruments.
75. Define 'Air foil'.
76. What is 'aerodynamic centre'?
77. Explain the term 'Empennage'.
78. State the uses of titanium alloys in aircraft industry.
79. Define 'specific impulse' of rockets.
80. What is cryogenic propellant? provide example.


81. Distinguish ranging from air breathing propulsion and rocket propulsion
82. What are the new kinds of alloys used now days for airframe construction of modern aircraft?
83. Name any 4 components of airframe of an air-plane and mention their functions
84. What is stratopause?
85. Define Mach number
86. What are the general kinds of constructions of an air-plane structure?
87. What are the general considerations for the fuselage design of an air-plane.
88. What is basic operating principle of a piston engine?
89. Define specific impulse of a rocket.
90. What is jet thrust?
---------------------------------------------------------------------------------------------------------------------

PART  A
APRIL/MAY 2010

1. (i) Which factors limit the speed of the current day commercial aircraft?
(ii) Bring out the essential differences in the structural design approaches of fuselage with respect to early air-planes and modern air-planes.
2. (i) discuss how modern developments in aerodynamics and aerospace materials influenced aircraft design.
(ii) elaborate the special requirements of aircraft power plant?
3. (i) Draw the 3 views of a small light aircraft?
(ii) discuss with neat sketch the components of an air-plane and their functions.
4. (i) How are air-planes classified? explain the different kinds of flight vehicles with sketch.
(ii)Name the basic instruments for flying and discuss the principles of operation of Fly By Wire system.
5. (i) What is International Standard Atmosphere? define the basic structure of atmosphere with a neat sketch.
(ii) Derive relations for pressure and temperature variations with altitude in troposphere.
6. (i) Sketch a typical aerofoil and discuss how the lifts are generated by free stream air flow.
(ii) describe induced drag. How is it generated in the air-plane?
7. (i) discuss the kinds of various fuselage constructions with neat sketches.
(ii) Draw the graph ranging from lift coefficients versus drag coefficients for an aircraft.
8. Write short notes on:
1. Wing constructions
2. Composite materials and its merits
9. (i) Sketch a typical liquid propellant rocket and name the important components. elaborate the advantages of liquid propellant rocket over solid propellant rocket?
(ii)Write merits and demerits of the ramjet engine..
10. (i) discuss the principle of operation of a turbo prop engine. elaborate the advantages of turboprop engine?
(ii) Write the merits and demerits of a Jet engine over a piston engine.

NOV/DEC 2008

11. (i) elaborate the advantages and disadvantages of monoplanes compared to biplanes?
(ii) discuss why swept back wing concept has been developed.
(iii) explain the advantages of carry through structures connecting cantilever wings.
2. Describe a Ramjet engine and compare its working principle with SCRAMJET and turbojet engines.
13. Describe the major components of an aeroplane with a neat sketch and discuss their functions.
14. (i) Enumerate the basic instruments used for flying.
(ii) define the flight instruments measuring ATTITUDE of an aircraft.
15. (i) explain the temperature variation with altitude of standard atmosphere and classify the atmospheric layers.
(ii) Derive the expressions relating the standard atmosphere values of pressure, density and temperature at any altitude in the troposphere with that of sea level values.
16. (i) define an aerofoil and discuss its nomenclature.
(ii) describe centre of pressure, coefficient of pressure and Mach number.
(iii) Express lift and drag of an aerofoil in terms of normal and axial forces.
17. Explain how aero plane wings are constructed and indicate the option of materials for the main components.
18. (i) Write a short note on composite materials and their applications to aircraft construction.
(ii) explain briefly the option of material for aircraft engine components.
(iii) explain the need for Alclad aluminium alloys for aircraft structures.
19. (i) With a neat sketch discuss the principle of operation of a turbo prop engine.
(ii) What is a cryogenic rocket engine? discuss.
20. (i) Thrust produced by an aircraft engine is best discussed by Newton's 3rd legal regulations of motion. True/False? Justify your ans.
(ii) describe propeller efficiency.
(iii) define a turbofan engine with a neat sketch and discuss why the efficiency of this engine is better than a turbojet engine.

APRIL/MAY 2008

21. (i) Briefly discuss how the modern developments in the subjects of aerodynamics and aerospace materials influenced aircraft design.
(ii) Bring out the essential differences in the structural design approaches of fuselage with respect to early air-planes and modern planes.
22. (i) Briefly discuss why jet engines changed piston engines in aircraft propulsion with modern developments?
(ii) What factors limit the speed of current day commercial aircraft?
23. (i) explain the classification of flight vehicles with respect to principle of operation and configuration

(ii) Name the basic instruments for flying and discuss the principles of operation of any 2 with illustrations
24. (i) Distinguish ranging from conventional control and powered control of aircraft. Bring out the essential differences. elaborate the limitations of conventional control?
(ii) Sketch a typical system for control actuation. discuss the operation. elaborate the latest developments in control actuation systems?
25. (i) What is International Standard Atmosphere? define the basic structures of atmosphere with a neat sketch.
(ii) Derive relations for pressure and temperature variations with altitude.
26. (i) Sketch a typical air-foil and discuss how lift, drag and moment are generated when acting a pre-stream. What is the effect of angle of attach on the pressure distribution on the surface of the air-foil?
(ii) describe Mach number. How is it related to the temperature of the medium? What is the effect of Mach number on the drag of an air-foil?
27. Write Short notes on the following:
(i) Monocoque construction and
(ii) Geodesic construction of air-plane structures
28. (i) What is the role of composite materials in the modern air-plane construction? elaborate the prime components of the modern air-plane which are considered for composite materials?
(ii) Which parts/components of an air-plane can be made of stainless steel? elaborate the functional requirements of such components?
29. (i) Sketch a schematic diagram of a turboprop engine mark all the subsystems and discuss their functions, elaborate the limitations of turboprop engine?
(ii) Illustrate the principle of operation of a solid propellant rocket with a neat sketch. elaborate the advantages of solid propellant rocket?
30. (i) Sketch a typical liquid propellant rocket power plant and name the important components. elaborate the advantages of liquid propellant rockets over solid propellant rocket?
(ii) elaborate the applications of a turbojet engine? How does thrust vary with altitude and flight velocity for turbojet?

NOV/DEC 2007

31. With neat illustrations, discuss in detail the salient features of air-planes with biplane and monoplane design from aerodynamics point of view. Bring out the advantages and limitations of every kind.
32. Briefly define the modern developments in aircraft design with respect to the following:
New air-foil profiles, new fuselage designs, gas turbine engine powered propulsion system and flight control systems.
33. (i) explain the classification of flight vehicles. Mention the criteria for classification.
(ii) elaborate the salient features of monologue construction of an air-plane structure?
34. (i) Name any 2 basic instruments for flying. With illustrations discuss their operating principle.
(ii) With neat sketch, discuss the construction of a typical aircraft wing. Show all the structural components of wing construction and mention the kinds of loads/stresses experienced by the structural members.
35. Write short notes on the following:
(i) Geodesic constructions
(ii) Use of composite materials for aircraft structures.
36. Explain the following:
(i) Application of semi-monologue constructions for aircraft structures.
(ii) Use of titanium and composite materials for aircraft components and the need for such materials.
37. (i) What is international standard atmosphere? How are the different regions of atmosphere classified?
(ii) With neat illustration, define how lift and drag are produced, when an air-foil is placed in a uniform air flow.
38. (i) discuss how pressure, temperature and altitude are related in the mathematical representation of atmospheric property variations with altitude.
(ii) Draw a typical sketch of an air-foil and identify the important terminology with respect to its geometrical features. Draw any 2 NACA air-foils and discuss their nomenclature.
39. (i) Bring out the essential differences ranging from piston kind engines and jet engines for aircraft propulsion.
(ii) elaborate the applications of rockets? How are they classified?
40. (i) discuss how a propeller produces thrust for aircraft propulsion.
(ii) elaborate the merits and limitations of turbojet engines?

MAY/JUNE 2007

41. (i) Derive the relationship ranging from pressure and temperature in the region of stratosphere and troposphere.
42. (ii) compute the pressure and density at 800 m and 11000 m in the international standard atmosphere. The pressure at sea level is 101325 N/m², the sea level temperature is 288 K and lapse rate is 0.0065 K/m.
43. (i) describe Mach number and classify the flows based on Mac number range.
(ii) discuss indicated air speed, equivalent airspeed, and actual airspeed of an aircraft
(iii) What is meant by Magnus effect?
44. (i) How do you achieve longitudinal, lateral and directional controls in an aircraft?
(ii) Sketch a typical 3 view diagram of an aircraft.
(iii) elaborate the conventional kinds of landing gears used in aircraft?
45. (i) discuss with neat sketches the construction and working of an airspeed indicator.
(ii) elaborate the functions of flaps, winglets and slats?
(iii) describe boundary layer.
46. (i) describe an aerofoil and what is aerodynamic efficiency?
(ii) What is the reason of wing tip vortices? What is meant by induced drag and what is the effect of aspect ratio on induced drag?
(iii) elaborate streamlined and bluff bodies?
47. (i)Explain with neat sketches the constructional details of a wing assembly.
(ii) Distinguish ranging from monocoque and semi-monocoque structure.
48. Explain in detail the main groups of materials used in aircraft construction.
49. (i) discuss with neat sketches the operating principle of Turbo propeller engine. elaborate its advantages and limitations?
(ii) discuss why ramjet engine is not self starting kind.
50. (i) What is the working principle of an air-breathing engine?
(ii) elaborate the relative merits and demerits of turbo jet and bypass engines?
(iii) elaborate the advantages and limitations of rocket propulsion?

NOV/DEC 2006

51. With the help of diagram, discuss the elements of the 4 stroke, internal combustion, reciprocating engine in detail.
52. (i) discuss the term 'Biplane Interferrence'.
(ii) discuss the forces acting on an aeroplane.
(iii) What is 'aspect ratio'?
53. (i) Enumerate the components used in an aeroplane and discuss the purpose of every component.
(ii) discuss with a neat sketch, the working principle of any 1 instrument used for flying.
54. With the help of sketches discuss the subsequent.
(i) Longitudinal control
(ii) Lateral control
(iii) Directional control.
55. (i) discuss the terms
(1) Nose-Heavy
(2) Tail-Heavy
(ii) explain the pressure distribution round a using part.
56. (i) discuss the ways an aircraft will be have when disturbed from its path(Degrees of stability)
(ii) discuss the terms rolling, pitching and yawing.
57. (i) State the importance of composite materials used in aircraft constructions
(ii) Briefly explain the application of aluminum alloy and titanium in aircraft industry.
58. Discuss in detail with the help of sketches, the constructions of typical using and fuselage structure.
59. With the help of diagram, discuss the working and operation of turbojet engine.
60. (i) Enumerate the kinds of rockets.
(ii) discuss with the help of a sketch, the principle of operation of rocket.

MAY/JUNE 2006

61. (i) elaborate the different requirements of an aircraft power plant?
(ii) discuss the working of jet engine with neat sketch and explain the merits and demerits
62. Explain with neat sketch the components of an airplane and their functions.
63. How the airplanes are classified? explain about different kinds of flight vehicles with sketch wherever possible.
64. (i) Sketch the lift coefficient versus angle of attach for various aspect ratios.
(ii) describe center of pressure and aerodynamic centre.
(iii)Derive an expression for the speed of sound.
65. (i) Write short notes on International Standard Atmosphere?
(ii) compute the pressure and density at 8000m and 30000m in the international standard atmosphere. The pressure at sea level is 101325 N/m², the sea level temperature is 288 K and the lapse rate is 0.0065 K/m.
(iii) describe and discuss the significance of the following:
1. Bernoulli's theorem
2. Anhedral and Dihedral angle
66. (i) explain the relative merits and demerits of the different materials used in aircraft construction.
(ii) Write short notes on composite materials and their merits.
67. (i) Differentiate ranging from semi-monocoque and Monocoque fuselage structures.
(ii) discuss the construction details of wing assembly.
(iii) elaborate the forces encountered on aircraft structures during cruising?
68. (i) discuss with neat sketches the construction and working of solid propellant rocket engine system.
(ii) Distinguish ranging from turbo-jet and turbo-prop engines.
69. (i) discuss with neat sketches the constructional details and working of a bypass engine and elaborate its merits and demerits in comparison with turbojet engine?
(ii) elaborate the methods of thrust augmentation?

NOV/DEC 2005

70. Explain in detail:
(i) Static stability with example.
(ii) Dynamic stability with example.
71. (i) describe standard atmosphere.
(ii) State the Bernoulli's principle.
(iii) discuss its application of subsonic flow.
(iv) State the 4 forces acting on an aircraft in flight.
72. (i) describe Lift (L), Drag (D) and Pitching moment (M).
(ii) State the points to be observed for pressure distribution on an aerofoil.
(iii) Enumerate the 6 factors of an ideal aerofoil.
73. Explain the kinds of fuselage constructions with sketches.
74. (i) discuss in detail about the fundamental designs on which the using construction is based.
(ii) Draw and indicate the common wing forms.
(iii) Enumerate the main structural parts of a wing.
75. Describe with a neat diagram, a basic hydraulic system with hand pump.
76. Describe the operation of turbojet engine with a neat diagram.
77. (i) State and classifications of rocket engines.
(ii) State the advantages and disadvantages of liquid propellants rocket engine over other kinds.
78. Explain the operation of a solid of a solid propellant rocket motor with a neat diagram

------------------------------------------------------------------------------------------------------------------

AE1303 Aerodynamics-II, Third Semester Anna University B.E Aeronautical Nov/Dec 2010 Question Paper

Anna University old, model, previous and latest years question papers >> AE1303 Aerodynamics-II, Third Semester B.E Aeronautical Engineering Nov/Dec 2010 Question Paper: 

Looking for old, previous years and latest question papers of Anna University, Chennai ? You can find even sample and model question papers of Anna University and various universities in India. Have a look at this post which contains the latest year 2010 Anna University question paper conducted in the month Nov/Dec 2010, for the B.E/B.Tech Degree Examination 2010. This question paper is useful for those students who are preparing for Third Semester AE1303 Aerodynamics-II for the course Aeronautical Engineering. Part A consists of 10 Questions and Part B has 5 questions of either or choice with a weight-age of 16 marks each. Use the question paper for your upcoming exams to score high marks.

Anna University, Chennai
B.E./B.Tech. Degree Examination, Nov/Dec 2010 
Aeronautical Engineering 
AE1303 Aerodynamics-II 
Third Semester 
Time: 3 hours 
Maximum: 100 marks
Answer all questions.
Part A - (10 * 2 = 20 marks)

1. Write the one dimensional energy flow for isentropic flow.

2. define the shape of the nozzle needed to increase the velocity from subsonic to supersonic condition.

3. Differentiate ranging from normal shock wave and oblique shock wave.

4. What is meant by Fanno Flow?

5. Differentiate ranging from Mach wave and Shock wave.

6. What is perturbation potential?

7. describe drag divergence Mach number.

8. Name and sketch different supersonic files.

9. What is meant by transonic wind tunnel?

10. elaborate the advantages of optical methods of flow visualization?


Part B - (5 * 16 = 80 marks)

11.Derive the 3 dimensional continuity formula for a compressible flow. State the assumptions made.

or

12. With a neat sketch discuss the variation of static pressure of flow in a Convergent-Divergent nozzle under different back pressures.

13.Explain how a subsonic nozzle can be supersonic diffuser. [4 marks]

An aircraft flying at a Mach number 1.3 at an altitude 16000 m (p=0.15 bar, T = 216 K). The compression in its engine is partly achieved by a normal shock wave standing at the entry of its diffuser. Determine immediately downstream of the shock.

(a) Mach number

(b) Temperature of the air

(c) Pressure of the air

(d) change in entropy across the shock wave [12 marks]

Or

14. A combustion chamber in a gas turbine plant receives air at 350 K, 0.55 bar and 75 m/s. The air-fuel ratio is 30 and the calorific value of the fuel is 42 MJ/Kg. Taking lambda = 1.4 and R = 287 J/Kg K for the gas determine:

(a) The initial and final Mach numbers.

(b) Final pressure, temperature and velocity of the gas.

(c) Percent stagnation pressure loss in the combustion chamber and

(d) the maximum stagnation temperature attainable.

15. Derive the linearised velocity potential formula for compressible flow and based on the formula derived the Prandtl-Glauert rule.

Or

16. (a) Derive expressions for the lift and drag coefficients of a diamond aerofoil using linear theory. [8 marks]

(b) A flat plate size one m * 0.5 is tested at 1500 Kmph at the free stream pressure pressure of 0.8 MPa and temperature 30° C at an angle of attack of five degree. Using linear theory estimate the lift and drag. [8 marks]

17. (a) discuss upper and lower critical Mach numbers. [8 marks]

(b) Briefly explain area rule and supercritical air-foil. [8 marks]

Or

18. What is the role of sweep back and sweep forward for aircraft wings? discuss the aerodynamic characteristics of swept wings.

19. discuss the working principle of shock tube with necessary sketches on pressure variation in the tube. elaborate the advantages and limitations on the operations of a shock tube?

Or

20. (a) with a neat sketch discuss the working principle of a supersonic wind tunnel. [8 marks]

(b) with aid of sketch discuss the optical method of interferometer. [8 marks]

Production Technology B.E Aeronautical 4th Sem Anna University 2011 Question Paper

Anna University old, model, previous and latest years question papers >> AE 2253 Production Technology, Fourth Semester B.E Aeronautical Engineering 2011 Question Paper: 

Are you searching for old, previous years and latest question papers of Anna University, Chennai ? You can find even sample and model question papers of Anna University and various universities in India. Have a look at this post which contains the latest year 2011 Anna University question paper conducted in the month April/May 2011, for the B.E/B.Tech Degree Examination 2011. This question paper is useful for those students who are preparing for Fourth Semester AE 2253 Production Technology for the course Aeronautical Engineering. Part A consists of 10 Questions and Part B has 5 questions of either or choice with a weight-age of 16 marks each. Use the question paper for your upcoming exams to score high marks.

Anna University, Chennai
B.E./B.Tech. Degree Examination, April/May 2011 
Aeronautical Engineering 
AE 2253 Production Technology 
Fourth Semester 
(Common to Third Semester Automobile Engineering)
(Regulation 2008)
Time : Three hours    
Maximum: 100 marks
Answer ALL questions
PART A (10 x 2 - 20 marks)

1.    List out the basic ingredients of moulding sand and their purpose.

2.    Define the term "green strength" and explain its importance in the context of moulding.

3.    Explain the term "weld-ability" and give two examples of weld-able metals/alloys.

4.    Give the advantages of resistance welding.

5.    What are the factors affecting machinability?

6.    Write the functions of dielectric fluid in EDM process.

7.    State the three types of compression moulding and their utilities.

8.    What are the two properties of polymer melts that are important in plastics processing?

9.    Define the term "Forgeabilily" and state the commonly used test for its assessment.

10.    Why do physical and mechanical properties depend on the density of P/M parts?

PART B (5 x 16 = 80 marks)

11.    (a) Explain in detail with neat sketches the various process steps in investment casting process giving the process details, process capabilities and their applications. (16)

Or

(b) Explain in detail with neat sketches life shell moulding and centrifugal casting process giving the process details, process capabilities and their applications. (16)


12.    (a) Describe in detail with neat sketch any two resistance welding processes, their advantages, disadvantages and applications. (16)

Or

(b) Describe in detail thermit welding and electron beam welding. Also list their applications. (8 + 8)

13.    (a) Explain with neat sketch the various parts of a lathe, method of specifying a lathe and any four types of lathe operations. (16)

Or

(b) Discuss in detail the USM process with respect to the following. (4 x 4 )

(i)    Description of the process

(ii)    Important process parameters and their relation to MRR

(iii)    Surface roughness obtained

(iv)    Electrode materials used.

14. (a) Explain in detail the injection moulding process with respect to the equipment and moulds used. Also discuss on the defects in injection moulding.       (16)

Or

(b) Describe in detail the compression and transfer moulding with neat sketches. (16)

15. (a) Explain the different types of extrusion process with sketches. Also list out the product applications of each process.:     (16)

Or

(b) Describe in detail on the production of metallic powders with respect to the following. (4 x 4)

(i)    Atomization

(ii)    Blending and mixing

(iii)    Compaction

(iv)    Sintering.